FCX2000 Series
Low-cost, Die-free cutting and Processing
The FCX2000 is the ultimate solution for prototyping and small production runs of rigid materials without the use of a cutting die. Reduce media waste/ processing time with Graphtec’s precision cutting and dedicated software. Added offline(USB) operation enables users of all skill levels to easily process materials.
Features
Table size in the Line-up
3 different table size with choice of vacuum suction or electrostatic media-hold down methods depending on application.
Stronger Media Hold-Down
Distance between the holes has been improved from 30 mm on FC2250 Series to 20 mm on FCX2000 Series, as a result, FCX2000 Series provides stronger suction power to hold heavier and thicker medias down.
Dual tool holder with 500 gf on tool 1 and 1,000 gf on tool 2
Provided tools suitable for many applications
- The FCX2000 series has 2 tool holder in the carriage.
- Using 2 different kind of tool allows to do a different job
- without exchanging a tool at the same time. it can increase work efficiency.
Tool Holders & Cutting/Creasing Tools
Dual Tool Holders which can hold a cutting blade and creasing tool — to produce creases/folds and cuts on the same run.
Intuitive operation with 3.7″ LCD
Onboard control and settings are simplified using the equipped 3.7” LCD (240×128 dots) and tactile control panel.
Offline operation supported by use of USB flash memory
Cut and plot data is created with Cutting Master 4 or Graphtec Pro Studio. That saved data may be transferred to a USB flash memory and the cut plot data file can be selected from the USB on the FCX2000 using its menu operations. This simplified work-flow enables users to operate without being connected to the computer.
Data management using bar-code function with USB flash memory
In Print & Cut (referred to as “P&C”) operation, the cutting data is automatically selected from USB flash memory by scanning the barcode printed on the media then performs contour cutting. This prevents the usage of incorrect data, and improves work efficiency.
Expanded Contour Cutting Area
This included function expands the print and cut area to include objects outside of the registration marks! Production efficiency is enhanced and media waste is reduced.
Supports Standard Crop Marks
Contour cutting pre-printed media is also possible using “standard crop marks.” This operation is available with the included Cutting Master 4 plug-in workflow.
Reversed Color Registration Marks
Registraiton marks are detectable when there is sufficient contrast against the mark and its background. Ultra glossy and reflective media offer challenges for accurate registration mark detection. With this reversed color output, the sufficient contrast is brought back for the ability to contour cut pre-printed ultra glossy and reflecting sheeting.
Specifications
Model name | FCX2000-60VC | FCX2000-120VC | FCX2000-180VC | FCX2000-120ES (*1) | |
---|---|---|---|---|---|
Configuration | Digital servo system, Flatbed | ||||
Media hold-down method | Vacuum suction | Electrostatic | |||
Effective cutting area | 610mm x 920mm | 1,200mm x 920mm | 1,800mm x 920mm | 1,200mm x 920mm | |
Mountable media (Y-axis) | 950mm | ||||
Roll media support | Roll media stocker (manual feeding), supported media; width: up to 950 mm, weight: up to 5 kg | ||||
Maximum cutting speed | 400 mm/s (1 to 40 cm/s in 16 steps), in all directions | ||||
Cutting force | Tool 1: Max. 4.9 N (500 gf), Tool 2: Max. 9.8 N (1 kgf) | ||||
Cutting force settings | Tool 1: in 40 steps, Tool 2: in 40 steps | ||||
Minimum character size | Approx. 10 mm square (varies with character font and media) | ||||
Programmable resolution | GP-GL mode: 0.1/0.05/0.025/0.01 mm, HP-GL™ : 0.025 mm | ||||
Distance accuracy | Max. 0.1% of the distance moved or 0.1 mm, whichever is larger (in plotting mode) (*2) | ||||
Perpendicularity | Max 0.5 mm / 900 mm (in plotting mode) | ||||
Repeatability | Max 0.1 mm (excluding contraction of media, in plotting/cutting mode) (*2) | ||||
Standard interfaces | RS-232C, USB2.0 (High-Speed), and Ethernet (10BASE-T/100BASE-TX) | ||||
Buffer memory | 2MB | ||||
Command sets | GP-GL and HP-GL™ emulation (set by menu, or selects automatically by received data) | ||||
Number of tools | Two tools | ||||
Cutting blade, pen, and tool types | Cutting blade (supersteel), Pens (Water-based fiber-tip pen, oil-based ballpoint pen), and Creasing/scoring tool | ||||
Others | ARMS, Reverse side Cutting/Creasing using ARMS, ARMS Copy function, Creasing, Cutting/creasing in multiple passes | ||||
Power source | 100 to 240 VAC, 50/60 Hz (Auto switching) | ||||
Power consumption | Max. 140 VA | ||||
Operating environment | Temperature: +10 to +35 ºC, Humidity: 35 to 75% RH (non-condensing) | ||||
Guaranteed accuracy environment | Temperature: +16 to +32 ºC, Humidity: 35% to 70% RH (non-condensing) | ||||
External dimensions [W x D x H] (Approx.) | 1344 x 1409 x 930 mm (Including stand) | 1934 x 1409 x 930 mm (Including stand) | 2534 x 1409 x 930 mm (Including stand) | 1934 x 1409 x 930 mm (Including stand) | |
Weight (Approx.) | 76 kg (Including stand) (*3) | 99 kg (Including stand) (*3) | 116 kg (Including stand) (*3) | 93 kg (Including stand) | |
Compatible OS (*4) | Windows 10 / 8.1 / 8 / 7, Mac OS X 10.7 to 10.11 / macOS 10.12 (Sierra) to 10.14 (Mojave) | ||||
Supported software (*4) (*5) | Cutting Master 4 (*6), Graphtec Pro Studio (*6), Graphtec Studio(for Mac) | ||||
Compatible Standards | Safety | UL60950-1/cUL, CE marking (Low voltage and EMC) | |||
EMC | FCC-A, EN55032-A |
Media type
Type of media | Thickness | Support cutting blade | FCX2000-60VC | FCX2000-120VC | FCX2000-180VC | FCX2000-120ES | FCX4000-50/60ES | |
---|---|---|---|---|---|---|---|---|
Self-adhesive marking film (vinyl, fluorescent, reflective) | up to 0.25 mm | CB09UB-5 | 〇 | 〇 | 〇 | 〇 | 〇 | |
Heavy paper/board (pattern paper, oil board) | up to 0.5 mm | CB15U-5, CB15U-K30-5 | 〇 | 〇 | 〇 | 〇 | 〇 | |
up to 1.0 mm | CB30UC-1 | 〇 | 〇 | 〇 | 〇 | – | ||
Compressed foam sheet | up to 0.8 mm | CB15U-K30-5 | 〇 | 〇 | 〇 | – | 〇 | |
Sandblast resist rubber | up to 1.0 mm | 〇 | 〇 | 〇 | 〇 | 〇 | ||
Cardboard | E flute | up to 1.5 mm | CB30UC-1 (*7) | 〇 | 〇 | 〇 | 〇 | – |
F / G flute | up to 1.2 mm | CB30UC-1 | 〇 | 〇 | 〇 | 〇 | – | |
CB15U-K30-5 | 〇 | 〇 | 〇 | 〇 | 〇 | |||
Rubber sheet | up to 1~2 mm | PM-CB-001 (*7) | 〇 | 〇 | 〇 | – | – | |
Clear sheet for plastic boxes | up to 0.5 mm | CB15U-5 | 〇 | 〇 | 〇 | 〇 | 〇 | |
up to 1.0 mm | CB15U-K30-5 | 〇 | 〇 | 〇 | 〇 | 〇 | ||
High-intensity reflective film | up to 0.5 mm | CB15UA-5 | 〇 | 〇 | 〇 | – | 〇 | |
up to 1.0 mm | CB15UA-K30-5 | 〇 | 〇 | 〇 | – | 〇 |
Options
Item | Part No. | Description |
---|---|---|
Graphtec Pro Studio Plus | OPS682-PLS | Design software including all advanced functions. (1 license) |
Graphtec Pro Studio Plus for Rhinestone | OPS682-RSF | Limited edition of rhinestone function only. (1 license) |
Graphtec Pro Studio Plus for Auto Nesting | OPS682-ANF | Limited edition of auto nesting function only. (1 license) |
Warning Light (Optional) (*8) | OPH-A40 | The component incorporated to FCX2000 |
Dimensions
Scale : mm
Tolerance : +/- 5 mm
Scale : mm
Tolerance : +/- 5 mm
Scale : mm
Tolerance : +/- 5 mm
Accessories
item | Q’ty | Description |
---|---|---|
Power cable | 1 pc. | The type of cable is different by destination |
Cutting blade holder | 1 set | PHP35-CB15-HS |
Cutting blade | 1 set | CB15U (2 blades), CB15U-K30 (5 blades) |
Loupe | 1 pc. | PM-CT-001, for checking blade length |
Fiber-tip pen | 1 set | KF700-BK (Black) and PHP31-FIBER (pen holder) |
Height adjustment tool | 1 set | For adjusting position of tool head (plate, key wrench) |
USB cable | 1 pc. | Length 2.9 m |
Roll media stocker | 1 set | Loadable media: width up to 950 mm, weight up to 5 kg |
Stand | 1 set | Legs of the stand (Connecting bar is packed with main unit) |
DVD-ROM | 1 pc. | User’s manual, Windows driver |
Printed document | 1 set | Quick guide, Safety manual |
Durable flexible hose | 1 pc. | For VC models only, 1.5 to 5 m (shrinked/extended) Connection bore diameter: 50mm |
Hose band | 2 pcs. | For VC models only, to fix the hose |
Protect sheet (PM-CR-004) | 1 mat | for protecting the writing panel of FCX2000-120ES, Transparent vinyl, thickness 0.3 mm, Size: 1,328 mm x 968 mm |
Consumable Items
Item | Model Name | Image | Description | |
---|---|---|---|---|
Cutting blade holder | PHP33-CB09N-HS | For CB09U series blade | ||
PHP33-CB15N-HS | For CB15U series blade | |||
PHP35-CB09-HS | For CB09U series blade | |||
PHP35-CB15-HS | For CB15U series blade | |||
NEW PM-CH-001 | For CB30UC / PM-CB-001 cutting blade | |||
Cutting blade | CB09UB-5 | 0.9mm dia. 45º, Supersteel | Self-adhesive marking film (vinyl, fluorescent, refractive), thin sheet, up to 0.25 mm thick. | |
CB09UB-K60-5 | 0.9mm dia. 60º, Supersteel | Thinner film (Tint film), 0.03 mm to 0.25 mm thick. | ||
CB15U-5 | 1.5mm dia. 45º, Supersteel | Rigid or thick film or sheet, heavy paper (pattern paper, oil board), 0.25 mm to 0.5 mm thick. | ||
CB15U-K30-5 | 1.5mm dia. 30º, Supersteel | Rigid or thick sheet, 0.25 mm to 0.5 mm thick. Sandblast resist rubber, up to 1.0 mm thick. And also small detailed characters on marking film (up to 0.25 mm thick). | ||
CB15UA-5 | 1.5mm dia. 45º, Supersteel | High-intensity reflective film or harder film, up to 0.5 mm thick. | ||
CB15UA-K30-5 | 1.5mm dia. 30º, Supersteel | High-intensity reflective film or harder film, up to 1.0 mm thick. | ||
CB30UC-1 | 3.0mm dia. 45º, Supersteel | Rigid or thicker sheet (cardboard), up to 1.2 mm thick. | ||
PM-CB-001 | 3.0mm dia. 30º, Supersteel | Rigid or thicker sheet (soft plastic, rubber, cardboard), 1.0 mm to 2.0 mm thick. | ||
Loupe | PM-CT-001 | Checking blade length, for PHP33 and PHP35 series | ||
Creasing / Scoring tool | CP-001 | Stick type, for heavy paper | ||
CP-002 | Roller type (R0.2), for heavy paper | |||
CP-003 | Roller type (R0.6), for cardboard | |||
PM-CT-002 | Ball on tip of stick, for curve on heavy paper | |||
Fiber-tip pen, pen holder | KF700-BK | Water-based fiber-tip pen, Black | ||
KF700-RD | Water-based fiber-tip pen, Red | |||
PHP31-FIBER | Pen holder for KF700 series pen | |||
Ballpoint pen, pen holder | KB700-BK | Oil-based ballpoint pen, Black | ||
PHP34-BALL | Pen holder for the KB700-BK pen | |||
Adhesive sheet, Cling mat | CM-0003-R1A | Adhesive sheet, supplying in roll, size 545 mm x 20 m | ||
CM-0004 | Cling mat for film based materials, size 435 x 610 mm | |||
CM-0005 | Cling mat for paper based materials, size 435 x 610 mm | |||
Protect sheet | PM-CR-004 | For protecting the writing panel of FCX2000-120ES, Transparent vinyl, thickness 0.3 mm |