DTM AP360e applicator for roll labels
Label Type: Die cut with waste removed. Clear labels can be used
12-month warranty on labour and non-wet parts, on every brand we carry.
- Container Width
- 25.4mm to 238mm (1″ to 9.4″)
- Container Diameter
- 15mm to 170mm (0.6″ to 6.7″)
- Container Shape
- Cylindrical and many tapered
- Supply roll diameter
- Up to 203mm (8″ )
- Container Width: 25.4mm to 238mm (1″ to 9.4″)
- Container Diameter: 15mm to 170mm (0.6″ to 6.7″)
- Container Shape: Cylindrical and many tapered
- Supply roll diameter: Up to 203mm (8″ )
- Media liner width: 25.4mm to 213mm (1″ to 8.375″)
- Label Type: Die cut with waste removed. Clear labels can be used
- Label + Adhesive Thickness: 5 mil – 15 mil*
Specifications
17 specifications, as published by LabelGraff for the DTM AP360e applicator for roll labels.
- Container Width
- 25.4mm to 238mm (1″ to 9.4″)
- Container Diameter
- 15mm to 170mm (0.6″ to 6.7″)
- Supply roll diameter
- Up to 203mm (8″ )
- Media liner width
- 25.4mm to 213mm (1″ to 8.375″)
- Supply roll core
- 50.8mm to 76.2mm (2″ to 3″ I.D.)
- Gap between Labels
- Recommended: 3.175mm – 6.3500mm (1/8″ – 1/4″)
- Label Type
- Die cut with waste removed. Clear labels can be used
- Liner Thickness
- 2 mil – 10mil (smoothness will affect feeding – a liner that is too slippery or too thin will slip through the drive rollers)
- Label + Adhesive Thickness
- 5 mil – 15 mil*
- Wind Direction
- Wound out – See Copy-Position Chart below (Position 3 or 4 for most containers)
- Electrical rating
- 12VDC, 5.0A
- Power requirements
- 100-240VAC, 50/60 Hz, 60 watts
- Agency certifications
- UL, UL-C, CE, FCC Class A
- Weight
- 7.26 kg
- Dimensions
- 340mmW x 226mmH x 328mmD (13.4″W x 8.9″H x 12.9″D)
- Container Shape
- Cylindrical and many tapered
More than the machine.
Authorized distributor
Genuine machine and warranty, direct from the manufacturer.
See it print first
Run your artwork live on this exact machine before you buy.
Install, train & support
Setup, operator training, spare parts and same-week media.
12-month warranty
Labour and non-wet parts covered, on every brand we carry.
See the DTM AP360e applicator for roll labels on real work.
Labels, packaging and finished output from this machine — printed on our Sharjah floor.
Watch the DTM AP360e applicator for roll labels run before you commit.
It's on our 27,000 sq ft floor beside 50+ machines. Bring your artwork — leave with the sample.
Book a live demo Pick a demo slotAlso in Label Applicators
Machines LabelGraff supplies for the same job.
See the DTM AP360e applicator for roll labels running before you buy
It's in our 27,000 sq ft Sharjah demo center alongside 50+ other machines. Tell us your application and we'll run your job on it.